Redis Streams Latest

Scale applications based on Redis Streams.

Availability: v1.5+ Maintainer: Community

Trigger Specification

Redis 5.0 introduced Redis Streams which is an append-only log data structure.

One of its features includes Consumer Groups, that allows a group of clients to co-operate consuming a different portion of the same stream of messages.

There are three ways to configure redis-streams trigger:

  1. Based on the Pending Entries List (see XPENDING) for a specific Consumer Group of a Redis Stream
  2. Based on the Stream Length (see XLEN)
  3. Based on the Consumer Group Lag (see XINFO GROUPS). This is the only configuration that supports scaling down to 0. IMPORTANT: Redis 7+ is required for this feature to run.
triggers:
- type: redis-streams
  metadata:
    address: localhost:6379 # Required if host and port are not provided. Format - host:port
    host: localhost # Required if address is not provided
    port: "6379" # Required if address is not provided and host has been provided.
    usernameFromEnv: REDIS_USERNAME # optional (can also use authenticationRef)
    passwordFromEnv: REDIS_PASSWORD # optional (can also use authenticationRef)
    stream: my-stream # Required - name of the Redis Stream
    consumerGroup: my-consumer-group # optional - name of consumer group associated with Redis Stream
    pendingEntriesCount: "10" # optional - number of entries in the Pending Entries List for the specified consumer group in the Redis Stream
    streamLength: "50" # optional - Redis stream length, alternative to pendingEntriesCount scaler trigger
    lagCount: "5" # optional - number of lagging entries in the consumer group, alternative to pendingEntriesCount scaler trigger
    activationLagCount: "3" # required if lagCount is provided - lag count at which scaler triggers
    enableTLS: "false" # optional
    unsafeSsl: "false" # optional
    databaseIndex: "0" # optional
    # Alternatively, you can use existing environment variables to read configuration from:
    # See details in "Parameter list" section
    addressFromEnv: REDIS_ADDRESS # Optional. You can use this instead of `address` parameter
    hostFromEnv: REDIS_HOST # Optional. You can use this instead of `host` parameter
    portFromEnv: REDIS_PORT # Optional. You can use this instead of `port` parameter

Parameter list:

  • address - The host and port of the Redis server in the format host:port, for example my-redis:6379.

As an alternative to the address field, the user can specify host and port parameters.

  • host - The host of the Redis server.

It is not required if address has been provided.

  • port - The port of the Redis server.

It is only to be used along with the host/hostFromEnv attribute and not required if address has been provided.

  • usernameFromEnv - Name of the environment variable your deployment uses to get the Redis username. (Optional)

  • passwordFromEnv - Name of the environment variable your deployment uses to get the Redis password. (Optional)

  • stream - Name of the Redis Stream.

  • consumerGroup - Name of the Consumer group associated with Redis Stream.

Setting the consumerGroup causes the scaler to operate on pendingEntriesCount. Lack of consumerGroup will cause the scaler to be based on streamLength

  • pendingEntriesCount - Threshold for the number of Pending Entries List. This is the average target value to scale the workload. (Default: 5, Optional)
  • streamLength - Threshold for stream length, alternative average target value to scale workload. (Default: 5, Optional)
  • lagCount - Threshold for the consumer group lag number, alternative average target value to scale workload. (Default: 5, Optional)
  • activationLagCount - Lag count threshold at which to start scaling. Any average lag count below this value will not trigger the scaler. (Default: 0, Optional)
  • enableTLS - Allow a connection to Redis using tls. (Values: true, false, Default: false, Optional)
  • unsafeSsl - Used for skipping certificate check e.g: using self-signed certs. (Values: true,false, Default: false, Optional, This requires enableTLS: true)
  • databaseIndex - Index of Redis database to use. If not specified, the default value is 0.

Some parameters could be provided using environmental variables, instead of setting them directly in metadata. Here is a list of parameters you can use to retrieve values from environment variables:

  • addressFromEnv - The host and port of the Redis server, similar to address, but reads it from an environment variable on the scale target. Name of the environment variable your deployment uses to get the Redis server URL. The resolved host should follow a format like my-redis:6379.
  • hostFromEnv - The host of the Redis server, similar to host, but reads it from an environment variable on the scale target.
  • portFromEnv - The port of the Redis server, similar to port, but reads it from an environment variable on the scale target.

Authentication Parameters

The scaler supports two modes of authentication:

Using username/password authentication

Use the username and password field in the metadata to specify the name of an environment variable that your deployment uses to get the Redis username/password.

This is usually resolved from a Secret V1 or a ConfigMap V1 collections. env and envFrom are both supported.

Here is an example:

apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 15
  cooldownPeriod: 200
  maxReplicaCount: 25
  minReplicaCount: 1
  triggers:
    - type: redis-streams
      metadata:
        addressFromEnv: REDIS_HOST
        usernameFromEnv: REDIS_USERNAME # name of the environment variable in the Deployment
        passwordFromEnv: REDIS_PASSWORD # name of the environment variable in the Deployment
        stream: my-stream
        consumerGroup: consumer-group-1
        pendingEntriesCount: "10"

Using TriggerAuthentication

TLS:

Parameters used for configuring TLS authentication. Note this can not be used together with enableTLS and unsafeSsl on the ScaledObject, which is used to define using insecure TLS with skipping certificate check.

  • tls - To enable SSL auth for Redis, set this to enable. If not set, TLS for Redis is not used. (Values: enable, disable, Default: disable, Optional)
  • ca - Certificate authority file for TLS authentication. (Optional)
  • cert - Certificate for client authentication. (Optional)
  • key - Key for client authentication. (Optional)
  • keyPassword - If set the keyPassword is used to decrypt the provided key. (Optional)

Authentication:

  • username - Redis username to authenticate with.
  • password - Redis password to authenticate with.

You can use TriggerAuthentication CRD to configure the authentication. For example:

apiVersion: v1
kind: Secret
metadata:
  name: redis-streams-auth
type: Opaque
data:
  redis_username: <encoded redis username>
  redis_password: <encoded redis password>
  tls: "enable"
  ca: <your ca>
  cert: <your cert>
  key: <your key>
---
apiVersion: keda.sh/v1alpha1
kind: TriggerAuthentication
metadata:
  name: keda-redis-stream-triggerauth
spec:
  secretTargetRef:
    - parameter: username
      name: redis-streams-auth # name of the Secret
      key: redis_username # name of the key in the Secret
    - parameter: password
      name: redis-streams-auth # name of the Secret
      key: redis_password # name of the key in the Secret
    - parameter: tls
      name: redis-streams-auth
      key: tls
    - parameter: ca
      name: redis-streams-auth
      key: ca
    - parameter: cert
      name: redis-streams-auth
      key: cert
    - parameter: key
      name: redis-streams-auth
      key: key
---
apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 15
  cooldownPeriod: 200
  maxReplicaCount: 25
  minReplicaCount: 1
  triggers:
    - type: redis-streams
      metadata:
        address: localhost:6379
        stream: my-stream
        consumerGroup: consumer-group-1
        pendingEntriesCount: "10"
      authenticationRef:
        name: keda-redis-stream-triggerauth # name of the TriggerAuthentication resource

Using streamLength

To scale based on redis stream XLEN don’t set consumerGroup. Example:

apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 20
  cooldownPeriod: 200
  maxReplicaCount: 10
  minReplicaCount: 1
  triggers:
    - type: redis-streams
      metadata:
        addressFromEnv: REDIS_HOST
        usernameFromEnv: REDIS_USERNAME # name of the environment variable in the Deployment
        passwordFromEnv: REDIS_PASSWORD # name of the environment variable in the Deployment
        stream: my-stream
        streamLength: "50"

Using lagCount

To scale based on redis stream XINFO GROUPS, be sure to set activationLagCount. Example:

apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 15
  cooldownPeriod: 200
  maxReplicaCount: 25
  minReplicaCount: 1
  triggers:
    - type: redis-streams
      metadata:
        addressFromEnv: REDIS_HOST
        usernameFromEnv: REDIS_USERNAME # name of the environment variable in the Deployment
        passwordFromEnv: REDIS_PASSWORD # name of the environment variable in the Deployment
        stream: my-stream
        consumerGroup: consumer-group-1
        lagCount: "10"
        activationLagCount: "3"