Getting Started
KEDA Concepts
Operate
Reference
Scalers
Authentication Providers
Integrations

Redis Streams (supports Redis Cluster) Click here for latest

Redis Streams scaler with support for Redis Cluster topology

Availability: v2.1+ Maintainer: Community
Scaler code

Suggest a change

Warning

You are currently viewing v"2.15" of the documentation and it is not the latest. For the most recent documentation, kindly click here.

Trigger Specification

Redis 5.0 introduced Redis Streams which is an append-only log data structure.

One of its features includes Consumer Groups, that allows a group of clients to co-operate consuming a different portion of the same stream of messages.

There are three ways to configure redis-streams trigger:

  1. Based on the Pending Entries List (see XPENDING) for a specific Consumer Group of a Redis Stream
  2. Based on the Stream Length (see XLEN)
  3. Based on the Consumer Group Lag (see XINFO GROUPS). This is the only configuration that supports scaling down to 0. IMPORTANT: Redis 7+ is required for this feature to run.
triggers:
- type: redis-cluster-streams
  metadata:
    addresses: localhost:6379 # Required if hosts and ports are not provided. Format - comma separated list of host:port
    hosts: localhost # Comma separated lists of hosts. Required if address is not provided
    ports: "6379" # Comma separated lists of ports. Required if addresses are not provided and hosts has been provided.
    usernameFromEnv: REDIS_USERNAME # optional (can also use authenticationRef)
    passwordFromEnv: REDIS_PASSWORD # optional (can also use authenticationRef)
    stream: my-stream # Required - name of the Redis Stream
    consumerGroup: my-consumer-group # optional - name of consumer group associated with Redis Stream
    pendingEntriesCount: "10" # optional - number of entries in the Pending Entries List for the specified consumer group in the Redis Stream
    streamLength: "50" # optional - Redis stream length, alternative to pendingEntriesCount scaler trigger
    lagCount: "5" # optional - number of lagging entries in the consumer group, alternative to pendingEntriesCount scaler trigger
    activationLagCount: "3" # required if lagCount is provided - lag count at which scaler triggers
    enableTLS: "false" # optional
    unsafeSsl: "false" # optional
    databaseIndex: "0" # optional
    # Alternatively, you can use existing environment variables to read configuration from:
    # See details in "Parameter list" section
    addressesFromEnv: REDIS_ADDRESSES # Optional. You can use this instead of `addresses` parameter
    hostsFromEnv: REDIS_HOSTS # Optional. You can use this instead of `hosts` parameter
    portsFromEnv: REDIS_PORTS # Optional. You can use this instead of `ports` parameter

Parameter list:

  • addresses - Comma separated list of hosts and ports of Redis Cluster nodes in the format host:port for example node1:6379, node2:6379, node3:6379.

As an alternative to the addresses field, the user can specify hosts and ports parameters.

  • hosts - Comma separated list of hosts of Redis Cluster nodes.

It is not required if addresses has been provided.

  • ports: Comma separated list of ports for corresponding hosts of Redis Cluster nodes.

It is only to be used along with the hosts/hostsFromEnv attribute and not required if addresses has been provided.

  • usernameFromEnv - Name of the environment variable your deployment uses to get the Redis username. (Optional)

  • passwordFromEnv - Name of the environment variable your deployment uses to get the Redis password. (Optional)

  • stream - Name of the Redis Stream.

  • consumerGroup - Name of the Consumer group associated with Redis Stream.

Setting the consumerGroup causes the scaler to operate on pendingEntriesCount. Lack of consumerGroup will cause the scaler to be based on streamLength

  • pendingEntriesCount - Threshold for the number of Pending Entries List. This is the average target value to scale the workload. (Default: 5, Optional)
  • streamLength - Threshold for stream length, alternative average target value to scale workload. (Default: 5, Optional)
  • lagCount - Threshold for the consumer group lag number, alternative average target value to scale workload. (Default: 5, Optional)
  • activationLagCount - Lag count threshold at which to start scaling. Any average lag count below this value will not trigger the scaler. (Default: 0, Optional)
  • enableTLS - Allow a connection to Redis using tls. (Values: true, false, Default: false, Optional)
  • unsafeSsl - Used for skipping certificate check e.g: using self-signed certs. (Values: true,false, Default: false, Optional, This requires enableTLS: true)
  • databaseIndex - Index of Redis database to use. If not specified, the default value is 0.

Some parameters could be provided using environmental variables, instead of setting them directly in metadata. Here is a list of parameters you can use to retrieve values from environment variables:

  • addressesFromEnv - The hosts and corresponding ports of Redis Cluster nodes, similar to addresses, but reads it from an environment variable on the scale target. Name of the environment variable your deployment uses to get the URLs of Redis Cluster nodes. The resolved hosts should follow a format like node1:6379, node2:6379, node3:6379 ....
  • hostsFromEnv - The hosts of the Redis Cluster nodes, similar to hosts, but reads it from an environment variable on the scale target.
  • portsFromEnv - The corresponding ports for the hosts of Redis Cluster nodes, similar to ports, but reads it from an environment variable on the scale target.

Authentication Parameters

The scaler supports two modes of authentication:

Using username/password authentication

Use the username and password field in the metadata to specify the name of an environment variable that your deployment uses to get the Redis username/password.

This is usually resolved from a Secret V1 or a ConfigMap V1 collections. env and envFrom are both supported.

Here is an example:

apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 15
  cooldownPeriod: 200
  maxReplicaCount: 25
  minReplicaCount: 1
  triggers:
    - type: redis-cluster-streams
      metadata:
        addressesFromEnv: REDIS_ADDRESSES
        usernameFromEnv: REDIS_USERNAME # name of the environment variable in the Deployment
        passwordFromEnv: REDIS_PASSWORD # name of the environment variable in the Deployment
        stream: my-stream
        consumerGroup: consumer-group-1
        pendingEntriesCount: "10"

Using TriggerAuthentication

TLS:

Parameters used for configuring TLS authentication. Note this can not be used together with enableTLS and unsafeSsl on the ScaledObject, which is used to define using insecure TLS with skipping certificate check.

  • tls - To enable SSL auth for Redis, set this to enable. If not set, TLS for Redis is not used. (Values: enable, disable, Default: disable, Optional)
  • ca - Certificate authority file for TLS authentication. (Optional)
  • cert - Certificate for client authentication. (Optional)
  • key - Key for client authentication. (Optional)
  • keyPassword - If set the keyPassword is used to decrypt the provided key. (Optional)

Authentication:

  • username - Redis username to authenticate with.
  • password - Redis password to authenticate with.

You can use TriggerAuthentication CRD to configure the authentication. For example:

apiVersion: v1
kind: Secret
metadata:
  name: redis-streams-auth
type: Opaque
data:
  redis_username: <encoded redis username>
  redis_password: <encoded redis password>
  tls: "enable"
  ca: <your ca>
  cert: <your cert>
  key: <your key>
---
apiVersion: keda.sh/v1alpha1
kind: TriggerAuthentication
metadata:
  name: keda-redis-stream-triggerauth
spec:
  secretTargetRef:
    - parameter: username
      name: redis-streams-auth # name of the Secret
      key: redis_username # name of the key in the Secret
    - parameter: password
      name: redis-streams-auth # name of the Secret
      key: redis_password # name of the key in the Secret
    - parameter: tls
      name: redis-streams-auth
      key: tls
    - parameter: ca
      name: redis-streams-auth
      key: ca
    - parameter: cert
      name: redis-streams-auth
      key: cert
    - parameter: key
      name: redis-streams-auth
      key: key
---
apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 15
  cooldownPeriod: 200
  maxReplicaCount: 25
  minReplicaCount: 1
  triggers:
    - type: redis-cluster-streams
      metadata:
        address: node1:6379, node2:6379, node3:6379
        stream: my-stream
        consumerGroup: consumer-group-1
        pendingEntriesCount: "10"
      authenticationRef:
        name: keda-redis-stream-triggerauth # name of the TriggerAuthentication resource

Using streamLength

To scale based on redis stream XLEN don’t set consumerGroup. Example:

apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 20
  cooldownPeriod: 200
  maxReplicaCount: 10
  minReplicaCount: 1
  triggers:
    - type: redis-cluster-streams
      metadata:
        addressesFromEnv: REDIS_ADDRESSES
        usernameFromEnv: REDIS_USERNAME # name of the environment variable in the Deployment
        passwordFromEnv: REDIS_PASSWORD # name of the environment variable in the Deployment
        stream: my-stream
        streamLength: "50"

Using lagCount

To scale based on redis stream XINFO GROUPS, be sure to set activationLagCount. Example:

apiVersion: keda.sh/v1alpha1
kind: ScaledObject
metadata:
  name: redis-streams-scaledobject
  namespace: default
spec:
  scaleTargetRef:
    name: redis-streams-consumer
  pollingInterval: 15
  cooldownPeriod: 200
  maxReplicaCount: 25
  minReplicaCount: 1
  triggers:
    - type: redis-cluster-streams
      metadata:
        addressesFromEnv: REDIS_ADDRESSES
        usernameFromEnv: REDIS_USERNAME # name of the environment variable in the Deployment
        passwordFromEnv: REDIS_PASSWORD # name of the environment variable in the Deployment
        stream: my-stream
        consumerGroup: consumer-group-1
        lagCount: "10"
        activationLagCount: "3"